- Live Data Connection
- Post Session Replays
- Post Session CSVs Data Import
- Track Maps
- Driving Time
- Safety Car procedure
Specific Events User Guide
Live Data Connection
3 type of connections will be available:
- Traditional IMSA Timing connection - explain below in this document
- Al Kamel V2 Prococol - On Site - connection in pit lane on the same network as IMSA Timing
- Al Kamel V2 Protocol - On Cloud - connection via internet
Both Al Kamel V2 connections will perform the same and use the exact same protocol. Currently, it is our understanding than none of the extended feature of this protocol available in other series (GPS information and additional sector line) will be available.
We are also expecting that the replay with all the sector lines to be available in the IMSA Timing protocol post-event.
To connect live to an IMSA event, you need to setup your championship configuration with the following parameters:
It happens that some wrong best lap time correction message get send on the IMSA Timing protocol. This can lead to laps not being displayed when replaying/activating a session. If this is the case the option can be set to True. By default, the option is at False.
For any series, it is possible to filter the session that gets recorded on a project by using the Championship filter.
For example, for 2022 and for the IWSC championship, it is possible to use the following settings:
|Championship Filter Enabled||True|
This settings would only "allow" session that have the word "IWSC" in them. This would block any session that doesn't contain the word "IWSC" like all the IMPC or LMPC series for example. The advantage to use a championship filter is that your project stays "clean" of any other series categories and car information.
For 2022, the championship regulations should be set as follow:
|Fuel and Tires in Parallel||True|
Post Session Replays
Normally, on Tuesday at 12:00PM EST following an event, replays with all the sectors are made available at http://results.imsa.com/.
The replays are available in the "CSV and Replay" section:
After downloading the files and unzipping the file you should find two files:
- .txt which is the replay of the session.
- .csv which is explain here.
For races prior to 2017, replays can be found here.
Post Session CSVs Data Import
2 types of CSVs can be imported in HH Timing using the Import T&S Data function.
Alkamel "Time cards"
This file can be download directly following a session on http://results.imsa.com/ inside a specific session. This files only contains the 3 sectors information.
This file can be imported using the IMSA AlKamel file format and using the appropriate Timed or Race option.
The IMSA CSVs replays are available in the "CSV and Replay" section normally, on Tuesday at 12:00PM EST following an event. Those files contains all sectors available on track:
This file can be imported using the IMSA Timing file format and using the appropriate Timed or Race option:
The track maps for each events needs to be selected in the IMSA 3 Sectors Folder:
The most recent track map is the one without a year attached to it. Previous year tracks, if different would have the year added at the end. For example:
|Daytona_3Sectors||Current Track (used in 2022)|
|Daytona_3Sectors_2019||Track used in 2019 and in previous years|
24H at Daytona
For live sessions, the track map to use at Daytona is found in the IMSA 3 sectors folder and it is named Daytona_3Sectors:
HH Timing Settings
Tips and Tricks
Strategy Overview Annotations
For longer race you can use the Annotations section of the strategy overview to display important milestone and information for your race.
Here is an example of what your overview could look like:
Displayed on this overview are:
- a reminder of the Endurance Cup points
- two areas to remind that Oils needs to be added to the car
Here is how the annotations section is defined: